Click image to view full size image
CE Certificated metal Ridge Cap Roll Forming Machine With Pressed Steps
Introduction
This metal roll forming machine is designed to make aluminium & steel ridge cap sheets according to customers' requirement.
Technical Specifications of Ridge Cap Panels Roll Forming Machine
Technical Items | Details | |
Raw Material | Type | Aluminium & Steel Coils, PPGI, GI, PPGL |
Width | 400 mm | |
Thickness | 0.4-0.7 mm | |
Yield Strength | 235-345 MPa | |
Finished Products | Cover width | 300 mm |
Length | Adjustable | |
Required Power | Voltage | 220V/380V/415V/440V |
Driving Motor | 5.5 KW | |
Cutting Motor | 5.5 KW | |
Production Speed | Around 200 meters per hour | |
Coil Decoiler | Type | Un-powered or Powered |
Capacity | 3 tons | |
Rolling Stations | 13 sets | |
Rolling Shaft Diameter | 72 mm | |
Cutting Type | Post-cutting | |
Operation System | Mitsubishi PLC, transducer and touching screen | |
Supporting Tables | 2 sets | |
Machine Size | Around 8 x 1 x 1.4 meters | |
Machine Weight | Around 7 tons | |
Main Components of Ridge Cap Panels Roll Forming Machine
No. | Items | Quantity | ||
1 | Coil Decoiler | 1 set | ||
| | Direction Guilder | 1 set | |
Rolling System | 1 set | |||
Step Presser | 1 set | |||
Post-cutting Device | 1 set | |||
3 | Supporting Tables for Finished Products | 2 sets | ||
4 | Hydraulic Station for Cutting Device | 1 set | ||
5 | PLC Control Cabine |
 Sell
New Login
Company QR code Anytime Anywhere Mobile |
||